MarketingPress ReleasesProducts

Go with reliable mobile connectivity with Cel-Fi GO M

By February 18, 2021February 22nd, 2021No Comments
GO-M header

Go with reliable mobile connectivity with Cel-Fi GO M

Cel-Fi GO M delivers best voice and data wireless performance over the largest coverage footprint.

The Cel-Fi GO M is an evolved smart mobile signal booster that can amplify mobile signals whilst on the road or on board. The Cel-Fi GO M uses Nextivity’s award-winning, network-safe technology to automatically adapt to the moving environment and boost 3G and 4G for voice and data.

The Cel-Fi GO M is the first carrier-class IP65 weather resistant mobile coverage solution. The rugged design combined with a thin film coating across the entire PCB assembly enables the device to withstand harsh conditions including dust and water exposure.

Cel-Fi GO M is cost-efficient and easy to deploy by an installer.

Cel-Fi products are mobile network approved and the only range of mobile signal boosters in the UK that comply with the regulatory requirements in the UK and Ireland. The Cel-Fi commitment is to protect the operator’s network, deliver the best in-building mobile performance, and be the easiest solution to install.

Product variations

Cel-Fi GO M Vehicle

Get ready for a road trip with reliable mobile signal! The Cel-Fi GO M Vehicle bundle is the ideal in-vehicle solution for cars, vans, caravans and motorhomes.

The Cel-Fi GO M Vehicle bundle features two of the best-performing antennas in their footprint on the market. The Cel-Fi Mag Mount donor antenna and intuitive Cel-Fi Attenuated server antenna dynamically adjust gain whilst on the road. The weather resistant IP68 plastic casings are built to securely attach to cars, vans, caravans and motorhomes.

The Cel-Fi Magnet Mount Antenna is an outdoor wideband mobile omnidirectional antenna with up to 4 dB gain. The weather resistant IP67 plastic casing is built to securely attach to cars, vans, caravans and motorhomes.

  • 3G/4G/LTE wideband mobile antenna
  • SMA Male connector
  • Omni-directional
  • 3m low loss high-performance cable
  • Ground plane dependent

The Cel-Fi Mobile Server Antenna is a mobile / LTE patch antenna that dynamically adjust gain in compliance with OFCOM licence-exempt regulation and is optimised for Cel-Fi GO products. The Cel-Fi Mobile Server Antenna has an adhesive mount for ease of installation.

Cel-Fi WAVE is the software application used for registering, setting-up, remotely monitoring, and updating Cel-Fi products. It provides a quick glance dashboard of signal strength, network operator, boost level and coverage type. From this app, you can switch network operator, update software and locate the optimal antenna placement.

What’s in the box?

  • 1 x Cel-Fi GO M mobile signal booster
  • 1 x Car Charger
  • 1 x Cel-Fi Magnet Mount Donor Antenna
  • 1 x Cel-Fi Attenuated Server Antenna

Installation

  1. Install the donor antenna
  2. Install the server antenna
  3. Mount the GO M near a power outlet
  4. Connect Donor & Server Antennas to GO M unit
  5. Plug in the Cel-Fi GO M
  6. Setup System with Cel-Fi WAVE app

Key features

  • 3G / 4G for voice and data
  • IP65 rated, weather resistant
  • Dynamically adjust gain in compliance with OFCOM licence-exempt regulation
  • Available for O2, EE, Three, Vodafone and all Mobile Virtual Network Operators
  • Can easily switch between mobile networks via the Cel-Fi WAVE app
  • Network safe, carrier approved
  • Smart Signal Booster with IntelliBoost© Chipset – Unconditionally Network Safe
  • Remote monitoring and management with the Cel-Fi WAVE app
BUY NOW - RESELLERS
BUY NOW - CUSTOMERS

Cel-Fi GO M Truck

Stay connected whilst you’re trucking across the country. The Cel-Fi GO M Truck bundle is the ideal in-vehicle solution for trucks.

The Cel-Fi GO M features the Cel-Fi Truck Antenna which was developed to offer a high-performance wideband antenna option for cross country truck drivers. The product features a heavy-duty spring base and includes a ladder or mirror-mount for easy installation perfect for trucks.

The Cel-Fi Trucker Antenna was developed to offer a high-performance wideband antenna option for cross country truck drivers. The product features a heavy-duty spring base and includes a mirror-mount for easy installation.

The Cel-Fi Mobile Server Antenna is a mobile / LTE patch antenna that dynamically adjust gain in compliance with OFCOM licence-exempt regulation and is optimised for Cel-Fi GO products. The Cel-Fi Mobile Server Antenna has an adhesive mount for ease of installation.

Cel-Fi WAVE is the software application used for registering, setting-up, remotely monitoring, and updating Cel-Fi products. It provides a quick glance dashboard of signal strength, network operator, boost level and coverage type. From this app, you can switch network operator, update software and locate the optimal antenna placement.

What’s in the box?

  • 1 x Cel-Fi GO M mobile signal booster
  • 1 x Car Charger
  • 1 x Cel-Fi Truck Donor Antenna
  • 1 x Cel-Fi Attenuated Server Antenna

Installation

  1. Install the donor antenna
  2. Install the server antenna
  3. Mount the GO M near a power outlet
  4. Connect Donor & Server Antennas to GO M unit
  5. Plug in the Cel-Fi GO M
  6. Setup System with Cel-Fi WAVE app

Key features

  • 3G / 4G for voice and data
  • IP65 rated, weather resistant
  • Dynamically adjust gain in compliance with OFCOM licence-exempt regulation
  • Available for O2, EE, Three, Vodafone and all Mobile Virtual Network Operators
  • Can easily switch between mobile networks via the Cel-Fi WAVE app
  • Network safe, carrier approved
  • Smart Signal Booster with IntelliBoost© Chipset – Unconditionally Network Safe
  • Remote monitoring and management with the Cel-Fi WAVE app
BUY NOW - RESELLERS
BUY NOW - CUSTOMERS

Cel-Fi GO M Marine

All aboard and stay connected! The Cel-Fi GO M Marine bundles is the ideal solution for boats, barges, yachts or any marine vessel.

The Cel-Fi GO M combined with the industrial Cel-Fi Marine Donor Antenna connects to cell towers along the coast. The product features a heavy-duty marine casing and includes a pole mount for easy installation.

The Cel-Fi Marine Antenna collects the mobile tower signal to send the cable to a Signal Booster. Also, when the cell phone transmits, the signal is transferred to a Signal Booster and transmitted back to the cell tower.

  • High-performance, omni-directional antenna
  • Threaded ferrule/post for side or bottom cable exit
  • Weather resistant
  • Built-in ground plane
  • For marine application
  • Easy installation

The Cel-Fi Mobile Server Antenna is a mobile / LTE patch antenna that dynamically adjust gain in compliance with OFCOM licence-exempt regulation and is optimised for Cel-Fi GO products. The Cel-Fi Mobile Server Antenna has an adhesive mount for ease of installation.

Cel-Fi WAVE is the software application used for registering, setting-up, remotely monitoring, and updating Cel-Fi products. It provides a quick glance dashboard of signal strength, network operator, boost level and coverage type. From this app, you can switch network operator, update software and locate the optimal antenna placement.

What’s in the box?

  • 1 x Cel-Fi GO M mobile signal booster
  • 1 x Car Charger
  • 1 x Cel-Fi Marine Donor Antenna
  • 1 x Cel-Fi Attenuated Server Antenna

Installation

  1. Install the donor antenna
  2. Install the server antenna
  3. Mount the GO M near a power outlet
  4. Connect Donor & Server Antennas to GO M unit
  5. Plug in the Cel-Fi GO M
  6. Setup System with Cel-Fi WAVE app

Key features

  • 3G / 4G for voice and data
  • IP65 rated, weather resistant
  • Dynamically adjust gain in compliance with OFCOM licence-exempt regulation
  • Available for O2, EE, Three, Vodafone and all Mobile Virtual Network Operators
  • Can easily switch between mobile networks via the Cel-Fi WAVE app
  • Network safe, carrier approved
  • Smart Signal Booster with IntelliBoost© Chipset – Unconditionally Network Safe
  • Remote monitoring and management with the Cel-Fi WAVE app
BUY NOW - RESELLERS
BUY NOW - CUSTOMERS

Established in 2002, Frequency employs over 60 people, across the UK, Germany and the Netherlands. Frequency Telecom is the master distributor of Nextivity’s Cel-Fi range of mobile signal boosters in the UK and Ireland. Cel-Fi products are licence-exempt and fully meets the regulatory requirements in the UK (Ofcom SI 2018/399) and Ireland (ComReg S.I.No.283 of 2018).

Web:      www.frequencytelecom.com
Email:    [email protected]
Tel:         +44 208 397 2222

Nextivity

Headquartered in San Diego, Nextivity Inc. develops the award-winning line of Cel-Fi products that optimize cellular coverage in homes, office and enterprise buildings. Cel-Fi products are self-configuring and leverage the advanced signal-processing and radio design of Nextivity’s IntelliBoost chipset to deliver the industry’s highest gain at the lowest cost per square foot. The Cel-Fi commitment is to protect the operator’s network, deliver the best in-building mobile performance, and be the easiest solution to install.

Web:      www.cel-fi.com

Our Average Rating
From Partners
Click here to read more.