Does your NHS hospital, GP practice or clinic suffer from poor mobile signal?

Cel-Fi can improve mobile connectivity in any NHS building.

Many hospitals, clinics and GP practices suffer from poor mobile coverage.

Cel-Fi smart signal boosters are the highest-performing, most powerful mobile signal boosters available on the market to combat the universal problem of poor mobile coverage. With up to 100dB gain, it is designed to improve voice and data coverage for 3G/4G in any indoor space. Cel-Fi solutions are cost-effective, legal and easy to deploy.

The Cel-Fi commitment is to protect the operator’s network, deliver the best in-building mobile performance, and be the easiest solution to install.

Cel-Fi products are licence-exempt and fully comply with OFCOM SI 2018/399 (UK) and ComReg S.I.No.283 of 2018 (Ireland).

Frequency Telecom is a master distributor of Cel-Fi products in the UK and Ireland.

Contact us to find out how we can improve mobile connectivity in any NHS building.

Testimonials

Our range of mobile signal solutions

Cel-Fi PRIME is the ideal solution to improve mobile signal coverage in smaller spaces of 1,200 ft² / 110m².

The Cel-Fi PRIME offers a plug-and-play mobile signal solution and provides 80dB gain for 3G and 4G simultaneously. Cel-Fi PRIME will reduce the mobile device’s power requirements and extend its battery life. It offers plug-and-play mobile signal coverage, eliminating dead zones and dropped calls to provide clear and reliable connections.

Cel-Fi products are mobile network approved and fully meets the regulatory requirements in the UK and Ireland. The Cel-Fi commitment is to protect the operator’s network, deliver the best in-building mobile performance, and be the easiest solution to install.

You must have at least one bar of signal somewhere in the building.

  • Licence exempt and fully meets Ofcom requirements SI 2018/399 (UK) and ComReg S.I.No.283 of 2018 (Ireland)
  • 5-minute plug-and-play set-up. No installation required.
  • 80 dB max signal gain covering an area 1,200 ft² / 110 m² per unit
  • Available for EE, Three, and all hosted Mobile Virtual Network Operators
  • Can easily switch between mobile networks via the Cel-Fi WAVE app
  • Carrier approved, boosts 3G and 4G simultaneously
  • Smart Signal Booster with IntelliBoost© Chipset – Unconditionally Network Safe
  • Remote monitoring and management with the Cel-Fi WAVE app
Cel-Fi SOLO quick installation

The Cel-Fi SOLO Smart Signal Booster is the most powerful carrier-grade solution available designed to solve mobile coverage problems for voice and data. With up to 100dB of gain, it covers up to 16,000 ft² /1,500 m² of indoor space per system. The easy-to-install solution includes a whip antenna and patch antenna or can be configured with an external wideband directional antenna and multiple server antennas for wider coverage.

Cel-Fi products are mobile network approved and fully meet the regulatory requirements in the UK and Ireland. The Cel-Fi commitment is to protect the operator’s network, deliver the best in-building mobile performance, and be the easiest solution to install.

The system needs to detect a minimum signal outside of the building to operate or you must have at least one bar of signal somewhere in the building.

  • Licence exempt and fully meets Ofcom requirements SI 2018/399 (UK) and ComReg S.I.No.283 of 2018 (Ireland)
  • Quick and easy setup and installation
  • 100 dB max signal gain covering an area 16,000 ft² / 1,500 m² per unit
  • Available for O2, EE, Three, Vodafone and all Mobile Virtual Network Operators
  • Can easily switch between mobile networks via the Cel-Fi WAVE app
  • Carrier approved, boosts 3G and 4G simultaneously
  • Smart Signal Booster with IntelliBoost© Chipset – Unconditionally Network Safe
  • Remote monitoring and management with the Cel-Fi WAVE app

The Cel-Fi GO X Smart Signal Booster is the highest-performing, most powerful mobile signal booster in its class. With up to 100dB gain, it is designed to improve voice and data coverage for 3G/4G in an indoor area of 15,000 ft² / 1,400m². The Cel-Fi GO X is IP65 rated, weather-resistant and does not interfere with other wireless devices. Cel-Fi GO X is cost-effective and easy-to-setup for users and installers.

Cel-Fi products are mobile network approved and fully meet the regulatory requirements in the UK and Ireland. The Cel-Fi commitment is to protect the operator’s network, deliver the best in-building mobile performance, and be the easiest solution to install.

The system needs to detect a minimum signal outside of the building to operate.

  • Licence exempt and fully meets Ofcom requirements SI 2018/399 (UK) and ComReg S.I.No.283 of 2018 (Ireland)
  • IP65 rated, weather-resistant.
  • 100 dB max signal gain in an area approximately 15,000 ft² / 1,400 m²
  • Available for O2, EE, Three, Vodafone and all Mobile Virtual Network Operators
  • Can easily switch between mobile networks via the Cel-Fi WAVE app
  • Carrier approved, boosts 3G and 4G simultaneously
  • Smart Signal Booster with IntelliBoost© Chipset – Unconditionally Network Safe
  • Remote monitoring and management with the Cel-Fi WAVE app

Cel-Fi QUATRA is the most advanced technology solution for improving indoor mobile network coverage. This scalable in-building mobile system delivers high-quality signal in venues up to 200,000 ft² and beyond. It is a cost-effective and easy-to-deploy solution that combines the best of active DAS and Smart Booster technologies that have been widely adopted by carriers around the world, setting a new standard in Signal Boosting capabilities.

Cel-Fi products are mobile network approved and fully meet the regulatory requirements in the UK and Ireland. The Cel-Fi commitment is to protect the operator’s network, deliver the best in-building mobile performance, and be the easiest solution to install.

The system needs to detect a minimum signal outside of the building to operate.

  • Licence exempt and fully meets Ofcom requirements SI 2018/399 (UK) and ComReg S.I.No.283 of 2018 (Ireland)
  • Requires site inspection and installation
  • Lowest cost per ft²
  • 100 dB max signal gain off-air
  • Improves mobile signal coverage up to 50,000 ft² / 4,750m² per Quatra system
  • Scalable to larger areas by combining multiple systems
  • Carrier approved, boosts 3G and 4G simultaneously
  • All digital, RF and Power over Ethernet (PoE) system with cat5/6 structured cabling
  • Available for O2, EE, Three, Vodafone and all Mobile Virtual Network Operators
  • Can be re-programmed to boost a different network without the need to replace hardware
  • Smart Signal Booster with IntelliBoost© Chipset – Unconditionally Network Safe
  • Remote monitoring and management with the Cel-Fi WAVE app

Key benefits

Headquartered in San Diego, Nextivity Inc. develops the award-winning line of Cel-Fi products that optimise mobile coverage in homes, office and enterprise buildings. Cel-Fi products are self-configuring and leverage the advanced signal-processing and radio design of Nextivity’s IntelliBoost chipset to deliver the industry’s highest gain at the lowest cost per square foot. The Cel-Fi commitment is to protect the operator’s network, deliver the best in-building mobile performance, and be the easiest solution to install.

Ease of Setup

Time to market (TTM) reduction

Lowest cost per sq ft

Supports strong business case/ROI

WAVE Software Portal

Remote management of devices

Off-Air or Small Cell Applications

Multiple independent systems in various areas

A Cel-Fi for any use case

Any size in-door space

Unconditionally network safe

Carrier approved and endorsed

OFCOM & ComReg compliant

OFCOM SI 2018/399 (UK) and ComReg S.I.No.283 of 2018 (Ireland)

IntelliBoost® Chipset

Advanced filtering, equalisation and echo-cancellation techniques

Scalable Solution

Single small cell or multiple small cells

Best in Performance

1000x Stronger

Key benefits

Headquartered in San Diego, Nextivity Inc. develops the award-winning line of Cel-Fi products that optimise mobile coverage in homes, office and enterprise buildings. Cel-Fi products are self-configuring and leverage the advanced signal-processing and radio design of Nextivity’s IntelliBoost chipset to deliver the industry’s highest gain at the lowest cost per square foot. The Cel-Fi commitment is to protect the operator’s network, deliver the best in-building mobile performance, and be the easiest solution to install.

Ease of Setup

Time to market (TTM) reduction

Lowest cost per sq ft

Supports strong business case/ROI

WAVE Software Portal

Remote management of devices

Off-Air or Small Cell Applications

Multiple independent systems in various areas

A Cel-Fi for any use case

Any size in-door space

IntelliBoost® Chipset

Advanced filtering, equalisation and echo-cancellation techniques

Unconditionally network safe

Carrier approved and endorsed

OFCOM & ComReg compliant

OFCOM SI 2018/399 (UK) and ComReg S.I.No.283 of 2018 (Ireland)

Scalable Solution

Single small cell or multiple small cells

Best in Performance

1000x Stronger

contact

Contact us and one of our representatives will be in touch within the same or next working day.